Weber Carburetor Rebuild Kits
Weber Carburetor Rebuild Kits

Weber Carburetor Rebuild Kits

Weber Carburetor Rebuild Kits and Service Sets by Carburetor City.

On this page you will find all our, currently, available rebuild kits for Weber carburettors.

Weber Carburetor Rebuild Kits and Service Sets by Carburetor City

!
9213370500
Weber 32 DARA Carburetor Service Kit for Renault 18

Rebuild Kit for Weber 32 DARA Carburetors for Renault 18

Service kit for the Weber 32DARA series carburetors as used by Renault on the 1647cc Renault 18 and 1995cc Renault 18 TX and Renault 18 GTX.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Fuel filter
  • Pump diaphragm
  • Float Hinge Pin
  • All required gaskets
  • All required rubber (Viton) o-rings
  • All required fiber rings
  • All required copper and aluminum washers

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburetor rebuild kit.

Weber 32 DARA Carburetor Service Kit for Renault 18

9213370500
Service kit for Weber 32 DARA Carburetors for Renault 21

Rebuild Kit for Weber 32 DARA Carburetors for Renault 21

Service kit for the Weber 32DARA series carburetors as used by Renault on the 1995 cc Renault 21 TS.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Fuel filter
  • Pump diaphragm
  • Float Hinge Pin
  • All required gaskets
  • All required rubber (Viton) o-rings
  • All required fiber rings
  • All required copper and aluminum washers

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburetor rebuild kit.

Service kit for Weber 32 DARA Carburetors for Renault 21

92151.70501
Weber DAT Turbo Carburetors Service Kit for Lancia

Weber DAT Turbo Carburetors Service Kit for Lancia

Service kit for the Turbo-version of the Weber DAT 32 series carburetors as used by Lancia on their Delta Turbo HF.

More specifically, this set caters for the Weber 32DAT 23/150

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Rubber (Viton) float chamber gasket
  • 4 Butterfly screws
  • Float Hinge Pin
  • Pump diaphragm
  • Fuel Filter
  • Base gasket
  • Power Valve Diaphragm
  • Complete needle valve (size 200)
  • 2 Throttle Shaft Securing Tabs
  • All required Viton o-rings
  • All required fiber rings
  • All required copper and aluminum rings

This is a Carburetor City carburetor rebuild kit.

Weber DAT Turbo Carburetors Service Kit for Lancia

DAT SERVICE KIT
Weber DAT Carburetors Rebuild Kit for Fiat and Lancia

Weber DAT Carburetors Service Kit for Fiat and Lancia

Rebuild kit for the Weber DAT34 series carburetors as used on, amongst others, the following cars:

  • Fiat Croma
  • Lancia Delta
  • Lancia Prisma
  • Lancia Beta
  • Lancia Trevi

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

It fits, amongst others, the following model carburetors:

  • Weber 34DAT 1/150-250
  • Weber 34DAT 2/150-250
  • Weber 32DAT 3/250
  • Weber 32DAT 7/252

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Float chamber gasket
  • Pump diaphragms
  • Base gasket
  • Power Valve Diaphragm
  • Throttle shaft seals
  • Complete needle valve (size 200)
  • All required Viton o-rings
  • All required fiber rings
  • All required copper and aluminum rings

This is a Carburetor City carburetor rebuild kit.

Weber DAT Carburetors Rebuild Kit for Fiat and Lancia

DATR
Weber DATR Carburetors Rebuild Kit for Fiat and Lancia

Weber DATR Carburetors Service Kit for Fiat and Lancia

Rebuild kit for the Weber DATR32 en DATR34 series carburetors as used on the following cars:

  • Lancia Beta 1300
  • Lancia Beta 1600
  • Lancia Beta 2000
  • Fiat X1/9 1500

Contains all required parts to service 1 carburettor of the following varieties:

  • Weber 34DATR 28/250
  • Weber 32DATR 3/250
  • Weber 32DATR 1/150-250
  • Weber 34DATR 2/150-250

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Consists, amongst others, of the following parts:

  • Pump diaphragm
  • Complete needle valve (size 150)
  • All required gaskets
  • All required Viton o-rings
  • All required aluminum washers

This is a Carburetor City carburetor rebuild kit.

Weber DATR Carburetors Rebuild Kit for Fiat and Lancia

DCDSERVICEKIT
Weber DCD Carburetor Service Kit

Weber DCD Carburetor Service Kit

Service kit for the Weber DCD series carburetors.

Fits both the 28/36 as well as the 36/36 versions.

Contains all required parts to service 1 carburettor.

Contains amongst other, a needle valve, fuel filter and the required gaskets fiber rings and copper washers.

Weber DCD Carburetor Service Kit

K778SE
6 x Weber DCN 40 Service Kit for Ferrari 275 GTB and 275 GTS and 365 GTB/4 Daytona

6 x Weber DCN 40 Service Kit for Ferrari 275 GTB and 275 GTS and 365 GTB/4 Daytona

6 x service kit for the Weber DCN 40 carburetors.

Contains all required parts to service 6 carbs.

Consists, amongst others, of the following parts:

  • 6 float chamber gaskets
  • 6 pump gaskets
  • 6 pump diaphragms
  • 6 complete needle valves (size 175)
  • All required Viton o-rings
  • All required fiber rings
  • All required copper and aluminum rings

Suitable for amongst others the Ferrari 275GTB and 275GTS and the Daytona 365 GTB 4.

Please click HERE for instructions on how to set the float level on the Weber DCNF series.

6 x Weber DCN 40 Service Kit for Ferrari 275 GTB and 275 GTS and 365 GTB/4 Daytona

DCNF DCNVH36
Weber DCNF36 DNCVH36 and DC36 Carburetors Service Kit

Weber DCNF36 DNCVH36 and DC36 Carburetors Service Kit

Service kit for the Weber DCNF 36, DNCVH 36 and DC 36 series carburetors.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Float chamber gasket
  • Pump gasket
  • Pump diaphragm
  • Base gasket
  • Complete needle valve (size 175)
  • All required Viton o-rings
  • All required fiber rings
  • All required copper and aluminum rings

Weber DCNF36 DNCVH36 and DC36 Carburetors Service Kit

DCNF40 SERVICE KIT
Weber DCNF40 Carburetor Service Kit

Weber DCNF40 Carburetor Service Kit

Service kit for the Weber DCNF 40 series carburetors.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • float chamber gasket
  • pump gasket
  • pump diaphragm
  • complete needle valve (size 175)
  • All required Viton o-rings
  • All required fiber rings
  • All required copper and aluminum rings

Please click HERE for the data on how to set the float level on the Weber DCNF series.

Weber DCNF40 Carburetor Service Kit

DCNF PASO
Rebuild Kit for Weber DCNF44 Carburetors for Ducati Paso

Rebuild Kit for Weber DCNF44 Carburetors for Ducati Paso

Service kit for the Weber DCNF 44 series carburetors as used on the Ducati Paso.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Float Chamber Gasket
  • Pump Diaphragm
  • Complete Needle Valve (size 300)
  • Internal Fuel Filter
  • Float Hinge Pin
  • Lock Tabs for Throttle Shaft Nuts
  • All required Viton o-rings
  • All required Fiber Washers
  • All required Copper Washers
  • All required Aluminum Washers

Please click HERE for the instructions on how to set the float level on the Weber DCNF series.

This is a Carburetor City carburetor service kit.

Rebuild Kit for Weber DCNF44 Carburetors for Ducati Paso

K776SE
4 x Weber DCNF Service Kit for Ferrari 308 GT4 and Lamborghini Urraco

4 x Weber DCNF Service Kit for Ferrari 308 GT4 and Lamborghini Urraco

4 x service kit for the Weber DCNF 35, 36, 37, 38, 40 and 43 carburetors.

Contains all required parts to service 4 carburettors.

Consists, amongst others, of the following parts:

  • 4 float chamber gaskets
  • 4 pump gaskets
  • 4 pump diaphragms
  • 4 complete needle valves (size 175)
  • All required Viton o-rings
  • All required fiber rings
  • All required copper and aluminum rings

Suitable for amongst others the Ferrari 308 GT/4 and Lamborgini Urraco 3000.

Please click HERE for instructions on how to set the float level on the Weber DCNF series.

4 x Weber DCNF Service Kit for Ferrari 308 GT4 and Lamborghini Urraco

K775SE
3 x Weber DCNF Service Kit for Ferrari Dino 206 GT

3 x Weber DCNF Service Kit for Ferrari Dino 206 GT

3 x service kit for the Weber DCNF 12 and 13 carburetors.

Contains all required parts to service 3 carburettors.

Consists, amongst others, of the following parts:

  • 3 float chamber gaskets
  • 3 pump gaskets
  • 3 pump diaphragms
  • 3 complete needle valves (size 175)
  • All required Viton o-rings
  • All required fiber rings
  • All required copper and aluminum rings

Suitable for amongst others the Ferrari Dino 206GT.

Please click HERE for instructions on how to set the float level on the Weber DCNF series.

3 x Weber DCNF Service Kit for Ferrari Dino 206 GT

PMW137
Rebuild Kit for Weber 32 DCNV carburetors for Chrysler Alpine

Rebuild Kit for Weber 32 DCNV carburetors for Chrysler Alpine

Service kit for the Weber DCNV 32 carburetor as fitted to, amongst others, the:

  • 1975 - 1979 Chrysler Alpine 1440.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

Contains, amongst others, the following parts:

  • Top Cover Gasket
  • Carburetor-to-manifold gaskets
  • Fuel filter
  • Pump diaphragm
  • Power valve diaphragm
  • Needle Valve assembly; size 175
  • Aluminum washer
  • Fiber washer
  • Various rubber / Viton O-Rings

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Weber 32 DCNV carburetors for Chrysler Alpine

PMW137
Rebuild Kit for Weber 36 DCNVH carburetors for Hillman Minx

Rebuild Kit for Weber 36 DCNVH carburetors for Hillman Minx

Service kit for the Weber DCNVH 36 carburetor as fitted to, amongst others, the:

  • 1592 cc Hillman Minx.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

Contains, amongst others, the following parts:

  • Top Cover Gasket
  • Carburetor-to-manifold gasket
  • Fuel filter
  • Pump diaphragm
  • Power valve diaphragm
  • Needle Valve assembly; size 175
  • Aluminum washer
  • Fiber washer
  • Various rubber / Viton O-Rings

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Weber 36 DCNVH carburetors for Hillman Minx

PMW137
Rebuild Kit for Weber 36 DCNVH carburetors for Simca 1307 GLS

Rebuild Kit for Weber 36 DCNVH carburetors for Simca 1307 GLS

Service kit for the Weber DCNVH 36 carburetor as fitted to, amongst others, the:

  • 1294 cc Simca 1307 GLS.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

Contains, amongst others, the following parts:

  • Top Cover Gasket
  • Carburetor-to-manifold gasket
  • Fuel filter
  • Pump diaphragm
  • Power valve diaphragm
  • Needle Valve assembly; size 175
  • Aluminum washer
  • Fiber washer
  • Various rubber / Viton O-Rings

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Weber 36 DCNVH carburetors for Simca 1307 GLS

PMW137
Rebuild Kit for Weber 36 DCNV(A) carburetors for Simca 1307 GT

Rebuild Kit for Weber 36 DCNV(A) carburetors for Simca 1307 GT

Service kit for the Weber DCNV and DCNVA 36 carburetor as fitted to, amongst others, the:

  • 1294 cc Simca 1307 GT.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

Contains, amongst others, the following parts:

  • Top Cover Gasket
  • Carburetor-to-manifold gasket
  • Fuel filter
  • Pump diaphragm
  • Power valve diaphragm
  • Needle Valve assembly; size 175
  • Aluminum washer
  • Fiber washer
  • Various rubber / Viton O-Rings

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Weber 36 DCNV(A) carburetors for Simca 1307 GT

PMW137
Rebuild Kit for Weber 36 DCNFA carburetors for Simca 1307 S and TI

Rebuild Kit for Weber 36 DCNFA carburetors for Simca 1307 S and TI

Service kit for the Weber DCNFA 36 carburetor as fitted to, amongst others, the 1294 cc Simca 1307 S and 1307 TI.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

Contains, amongst others, the following parts:

  • Top Cover Gasket
  • Carburetor-to-manifold gasket
  • Fuel filter
  • Pump diaphragm
  • Power valve diaphragm
  • Needle Valve assembly; size 175
  • Aluminum washer
  • Fiber washer
  • Various rubber / Viton O-Rings

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Weber 36 DCNFA carburetors for Simca 1307 S and TI

PMW137
Rebuild Kit for Weber 36 DCNV and DCNVA carburetors for Simca 1308 GT

Rebuild Kit for Weber 36 DCNV and DCNVA carburetors for Simca 1308 GT

Service kit for the Weber DCNV and DCNVA 36 carburetor as fitted to, amongst others, the:

  • 1442 cc Simca 1308 GT.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

Contains, amongst others, the following parts:

  • Top Cover Gasket
  • Carburetor-to-manifold gasket
  • Fuel filter
  • Pump diaphragm
  • Power valve diaphragm
  • Needle Valve assembly; size 175
  • Aluminum washer
  • Fiber washer
  • Various rubber / Viton O-Rings

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Weber 36 DCNV and DCNVA carburetors for Simca 1308 GT

PMW137
Rebuild Kit for Weber 36 DCNVH carburetors for Simca 1308 GT

Rebuild Kit for Weber 36 DCNVH carburetors for Simca 1308 GT

Service kit for the Weber DCNVH 36 carburetor as fitted to, amongst others, the:

  • 1442 cc Simca 1308 GT.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

Contains, amongst others, the following parts:

  • Top Cover Gasket
  • Carburetor-to-manifold gasket
  • Fuel filter
  • Pump diaphragm
  • Power valve diaphragm
  • Needle Valve assembly; size 175
  • Aluminum washer
  • Fiber washer
  • Various rubber / Viton O-Rings

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Weber 36 DCNVH carburetors for Simca 1308 GT

PMW137
Rebuild Kit for Weber 36 DCNVH carburetors for Simca 1309 GLS

Rebuild Kit for Weber 36 DCNVH carburetors for Simca 1309 GLS

Service kit for the Weber DCNVH 36 carburetor as fitted to, amongst others, the:

  • 1592 cc Simca 1309 GLS

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

Contains, amongst others, the following parts:

  • Top Cover Gasket
  • Carburetor-to-manifold gasket
  • Fuel filter
  • Pump diaphragm
  • Power valve diaphragm
  • Needle Valve assembly; size 175
  • Aluminum washer
  • Fiber washer
  • Various rubber / Viton O-Rings

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Weber 36 DCNVH carburetors for Simca 1309 GLS

PMW137
Rebuild Kit for Weber 36 DCNVH carburetors for Sunbeam 424

Rebuild Kit for Weber 36 DCNVH carburetors for Sunbeam 424

Service kit for the Weber DCNVH 36 carburetor as fitted to, amongst others, the:

  • 1442 cc Sunbeam 424
  • 1592 cc Sunbeam 424

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

Contains, amongst others, the following parts:

  • Top Cover Gasket
  • Carburetor-to-manifold gasket
  • Fuel filter
  • Pump diaphragm
  • Power valve diaphragm
  • Needle Valve assembly; size 175
  • Aluminum washer
  • Fiber washer
  • Various rubber / Viton O-Rings

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Weber 36 DCNVH carburetors for Sunbeam 424

PMW137
Rebuild Kit for Weber 36 DCNV carburetors for Sunbeam Alpine

Rebuild Kit for Weber 36 DCNV carburetors for Sunbeam Alpine

Service kit for the Weber 36 DCNV, DCNVH en DNCVA carburetor as fitted to, amongst others, the:

  • 1442 cc Sunbeam Alpine 1500 S
  • 1592 cc Sunbeam Alpine 1600 GL en SX.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

Contains, amongst others, the following parts:

  • Top Cover Gasket
  • Carburetor-to-manifold gasket
  • Fuel filter
  • Pump diaphragm
  • Power valve diaphragm
  • Needle Valve assembly; size 175
  • Aluminum washer
  • Fiber washer
  • Various rubber / Viton O-Rings

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Weber 36 DCNV carburetors for Sunbeam Alpine

PMW137
Rebuild Kit for Weber 36 DCNVH carburetors for Sunbeam Rapier

Rebuild Kit for Weber 36 DCNVH carburetors for Sunbeam Rapier

Service kit for the Weber DCNVH 36 carburetor as fitted to, amongst others, the:

  • 1592 cc Sunbeam Rapier.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

Contains, amongst others, the following parts:

  • Top Cover Gasket
  • Carburetor-to-manifold gasket
  • Fuel filter
  • Pump diaphragm
  • Power valve diaphragm
  • Needle Valve assembly; size 175
  • Aluminum washer
  • Fiber washer
  • Various rubber / Viton O-Rings

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Weber 36 DCNVH carburetors for Sunbeam Rapier

PMW137
Rebuild Kit for Weber 36 DCNVH carburetors for Talbot 150

Rebuild Kit for Weber 36 DCNVH carburetors for Talbot 150

Service kit for the Weber DCNVH 36 carburetor as fitted to, amongst others, the:

  • 1442 cc Talbot 150 with manual gearbox
  • 1592cc Talbot 150 with automatic transmission.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

Contains, amongst others, the following parts:

  • Top Cover Gasket
  • Carburetor-to-manifold gasket
  • Fuel filter
  • Pump diaphragm
  • Power valve diaphragm
  • Needle Valve assembly; size 175
  • Aluminum washer
  • Fiber washer
  • Various rubber / Viton O-Rings

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Weber 36 DCNVH carburetors for Talbot 150

PMW137
Rebuild Kit for Weber 36 DCNVH carburetors for Talbot 1510

Rebuild Kit for Weber 36 DCNVH carburetors for Talbot 1510

Service kit for the Weber DCNVH 36 carburetor as fitted to, amongst others, the:

  • Talbot 1510 1500 LS & GLS - 1442 cc
  • Talbot 1510 1600 GLS - 1592 cc
  • Talbot 1510 1300 GLS - 1294 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

Contains, amongst others, the following parts:

  • Top Cover Gasket
  • Carburetor-to-manifold gasket
  • Fuel filter
  • Pump diaphragm
  • Power valve diaphragm
  • Needle Valve assembly; size 175
  • Aluminum washer
  • Fiber washer
  • Various rubber / Viton O-Rings

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Weber 36 DCNVH carburetors for Talbot 1510

PMW137
Rebuild Kit for Weber 36 DCNVH carburetors for Talbot Horizon

Rebuild Kit for Weber 36 DCNVH carburetors for Talbot Horizon

Service kit for the Weber 36 DCNVH-DCA 2/101A carburetor as fitted to, amongst others, the:

  • Talbot Horizon 1500 GL & GLS - 1442 cc
  • Talbot Horizon 1600 GT - 1592 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

Contains, amongst others, the following parts:

  • Top Cover Gasket
  • Carburetor-to-manifold gasket
  • Fuel filter
  • Pump diaphragm
  • Power valve diaphragm
  • Needle Valve assembly; size 175
  • Aluminum washer
  • Fiber washer
  • Various rubber / Viton O-Rings

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Weber 36 DCNVH carburetors for Talbot Horizon

PMW137
Rebuild Kit for Weber 36 DCNVH carburetors for Talbot Matra Murena

Rebuild Kit for Weber 36 DCNVH carburetors for Talbot Matra Murena

Service kit for the Weber 36 DCNVH carburetor as fitted to, amongst others, the:

  • Talbot Matra Murena 1600 - 1592 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

Contains, amongst others, the following parts:

  • Top Cover Gasket
  • Carburetor-to-manifold gasket
  • Fuel filter
  • Pump diaphragm
  • Power valve diaphragm
  • Needle Valve assembly; size 175
  • Aluminum washer
  • Fiber washer
  • Various rubber / Viton O-Rings

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Weber 36 DCNVH carburetors for Talbot Matra Murena

PMW137
Rebuild Kit for Weber 36 DCNVH carburetors for Talbot Matra Rancho

Rebuild Kit for Weber 36 DCNVH carburetors for Talbot Matra Rancho

Service kit for the Weber 36 DCNVH and DCNVHA carburetors as fitted to, amongst others, the Talbot Matra Rancho

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

Contains, amongst others, the following parts:

  • Top Cover Gasket
  • Carburetor-to-manifold gasket
  • Fuel filter
  • Pump diaphragm
  • Power valve diaphragm
  • Needle Valve assembly; size 175
  • Aluminum washer
  • Fiber washer
  • Various rubber / Viton O-Rings

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Weber 36 DCNVH carburetors for Talbot Matra Rancho

PMW137
Rebuild Kit for Weber 36 DCNVH carburetors for Talbot Solara

Rebuild Kit for Weber 36 DCNVH carburetors for Talbot Solara

Service kit for the Weber 36 DCNVH carburetors as fitted to, amongst others, the:

  • Talbot Solara 1500 LS & GL - 1442 cc
  • Talbot Solara 1600 GLS - 1592 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

Contains, amongst others, the following parts:

  • Top Cover Gasket
  • Carburetor-to-manifold gasket
  • Fuel filter
  • Pump diaphragm
  • Power valve diaphragm
  • Needle Valve assembly; size 175
  • Aluminum washer
  • Fiber washer
  • Various rubber / Viton O-Rings

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Weber 36 DCNVH carburetors for Talbot Solara

PMW236
Rebuild Kit for 2 x Italian Weber 40 DCOE Carburetor

Rebuild Kit for 2 x Italian Weber 40 DCOE Carburetor

Comprehensive service kit for the original ITALIAN-made (!) Weber 40 DCOE 145 / 146 carburetors.

Contains the following parts to service 2 carburettors:

  • 2 x 150 Size Needle Valves
  • 4 Carburetor-to-Manifold Gaskets
  • 2 Float Chamber / Top Cover Gaskets
  • 2 Jet Cover Gaskets
  • 2 Spring Cover gaskets
  • 2 Nitrile Bottom Gaskets
  • 2 Fuel inlet filters
  • Various fiber washers
  • Various Aluminum washers
  • Various rubber (Vito) o-rings

This set is suitable for the above mentioned original-production Italian Weber DCOE's.

For the current production Spanish-made DCOE's, please use the WE437 kit.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as that is what you will be supplied with.
In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Rebuild Kit for 2 x Italian Weber 40 DCOE Carburetor

WE436
Comprehensive Rebuild Kit for 1 Italian Weber DCOE Carburetor

Comprehensive Rebuild Kit for 1 Italian Weber DCOE Carburetor

Comprehensive service kit for the ITALIAN-made (!) Weber DCOE versions 38, 40, 42, 45 and 48.

Contains all required parts to service 1 carburetor.

Consists, amongst others, of the following parts:

  • 175 size Needle valve
  • Full gasket set
  • Pump jet washers
  • Fuel inlet filter
  • Float pivot pin
  • Mixture screws x 2, long taper for better adjustment
  • Throttle return spring

This set is suitable for the original-production Italian Weber DCOE's.

For the current production Spanish-made DCOE's, please use the WE437 kit.

Comprehensive Rebuild Kit for 1 Italian Weber DCOE Carburetor

WE437
Comprehensive Rebuild Kit for 1 Spanish Weber DCOE Carburetor

Comprehensive Rebuild Kit for 1 Spanish Weber DCOE Carburetor

Comprehensive service kit for the SPANISH-made (!) Weber DCOE carburetor.

Contains all required parts to service 1 carb.

OE quality comprehensive service kit to suit the following Weber carburettors:

DCOE 40 type 151, DCOE 45 type 152

DCO 2/SP 48, DCO 2/SP 50, DCO 2/SP 55

Kit includes:

  • 175 Needle valve
  • Full gasket set
  • Pump jet washers
  • Fuel inlet filter
  • Float pivot pin

This set is suitable for the current production Spanish Weber DCOE's.

For the original production Italian-made DCOE's, please use the WE436 kit.

Comprehensive Rebuild Kit for 1 Spanish Weber DCOE Carburetor

DCOESK175NV
Budget Rebuild Kit for 1 Italian Weber DCOE Carburetor

Budget Rebuild Kit for 1 Italian Weber DCOE Carburetor

Budget service kit for the ITALIAN-made (!) Weber DCOE versions 38, 40, 42, 45 and 48.

Contains all required parts to service 1 carburetor.

Consists, amongst others, of the following parts:

  • 175 size Needle valve
  • Full gasket set
  • Fuel inlet filter
  • Float pivot pin
  • Parts diagram and float level setting instructions

Suitable for the original Italian Weber DCOE's.

For the current production Spanish-made DCOE's, please use the WE437 kit.

Budget Rebuild Kit for 1 Italian Weber DCOE Carburetor

DCOE GASKET KIT
Gasket kit for 1 Italian Weber DCOE carburetor

Gasket kit for 1 Italian Weber DCOE carburetor

This is a simple gasket kit for the Weber DCOE 40 carburetors.

Contains all required gaskets seals and rings to freshen-up 1 carb.

Suitable for the original Italian-made Weber DCOE's.

 

 

Gasket kit for 1 Italian Weber DCOE carburetor

PMW236
Rebuild Kit for 2 x Weber 40 DCOE Carburetor for Fiat Ritmo 130 TC

Rebuild Kit for 2 x Weber 40 DCOE Carburetor for Fiat Ritmo 130 TC

Newly arrived Rebuild Kit for 2 x Weber 40 DCOE Carburetor for Fiat 130 TC

Comprehensive service kit for the original ITALIAN-made (!) Weber 40 DCOE 145 / 146 carburetors as used on the 1995 cc Fiat Ritmo 130 TC.

Contains the following parts to service 2 carburettors:

  • 2 x 150 Size Needle Valves
  • 4 Carburetor-to-Manifold Gaskets
  • 2 Float Chamber / Top Cover Gaskets
  • 2 Jet Cover Gaskets
  • 2 Spring Cover gaskets
  • 2 Nitrile Bottom Gaskets
  • 2 Fuel inlet filters
  • Various fiber washers
  • Various Aluminum washers
  • Various rubber (Vito) o-rings

This set is suitable for the above mentioned original-production Italian Weber DCOE's.

For the current production Spanish-made DCOE's, please use the WE437 kit.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as that is what you will be supplied with.
In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Rebuild Kit for 2 x Weber 40 DCOE Carburetor for Fiat Ritmo 130 TC

PMW236
Rebuild Kit for 2 x Weber 40 DCOE Carburetor for Lotus Cortina

Rebuild Kit for 2 x Weber 40 DCOE Carburetor for Lotus Cortina

Comprehensive service kit for the original ITALIAN-made (!) Weber 40 DCOE 145 / 146 carburetors as used on the:

  • 1967 - 1970 1558 cc Ford Lotus Cortina.

Contains the following parts to service 2 carburettors:

  • 2 x 150 Size Needle Valves
  • 4 Carburetor-to-Manifold Gaskets
  • 2 Float Chamber / Top Cover Gaskets
  • 2 Jet Cover Gaskets
  • 2 Spring Cover gaskets
  • 2 Nitrile Bottom Gaskets
  • 2 Fuel inlet filters
  • Various fiber washers
  • Various Aluminum washers
  • Various rubber (Vito) o-rings

This set is suitable for the above mentioned original-production Italian Weber DCOE's.

For the current production Spanish-made DCOE's, please use the WE437 kit.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as that is what you will be supplied with.
In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Rebuild Kit for 2 x Weber 40 DCOE Carburetor for Lotus Cortina

PMW236
Rebuild Kit for 2 x Weber 40 DCOE Carburetor for Ford Escort 1600

Rebuild Kit for 2 x Weber 40 DCOE Carburetor for Ford Escort 1600

Comprehensive service kit for the original ITALIAN-made (!) Weber 40 DCOE carburetors as used, amongst others, on the:

  • 1970 - 1975 Ford Escort 1600 - 1601 cc
  • 1968 - 1971 Ford Escort 1600 DOHC - 1558 cc

Contains the following parts to service 2 carburettors:

  • 2 x 150 Size Needle Valves
  • 4 Carburetor-to-Manifold Gaskets
  • 2 Float Chamber / Top Cover Gaskets
  • 2 Jet Cover Gaskets
  • 2 Spring Cover gaskets
  • 2 Nitrile Bottom Gaskets
  • 2 Fuel inlet filters
  • Various fiber washers
  • Various Aluminum washers
  • Various rubber (Vito) o-rings

This set is suitable for the above mentioned original-production Italian Weber DCOE's.

For the current production Spanish-made DCOE's, please use the WE437 kit.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as that is what you will be supplied with.
In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Rebuild Kit for 2 x Weber 40 DCOE Carburetor for Ford Escort 1600

PMW236
Rebuild Kit for 2 x Weber 40 DCOE Carburetor for Ford Escort RS2000

Rebuild Kit for 2 x Weber 40 DCOE Carburetor for Ford Escort RS2000

Comprehensive service kit for the original ITALIAN-made (!) Weber 40 DCOE carburetors as used, amongst others, on the:

  • 1975 - 1980 Ford Escort RS2000

Contains the following parts to service 2 carburettors:

  • 2 x 150 Size Needle Valves
  • 4 Carburetor-to-Manifold Gaskets
  • 2 Float Chamber / Top Cover Gaskets
  • 2 Jet Cover Gaskets
  • 2 Spring Cover gaskets
  • 2 Nitrile Bottom Gaskets
  • 2 Fuel inlet filters
  • Various fiber washers
  • Various Aluminum washers
  • Various rubber (Vito) o-rings

This set is suitable for the above mentioned original-production Italian Weber DCOE's.

For the current production Spanish-made DCOE's, please use the WE437 kit.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as that is what you will be supplied with.
In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Rebuild Kit for 2 x Weber 40 DCOE Carburetor for Ford Escort RS2000

DCOFSERVICEKIT
Rebuild Kit for Weber DCOF carburetors for Fiat 1100

Rebuild Kit for Weber DCOF carburetors for Fiat 1100

Comprehensive service kit for Weber DCOF carburetors as used on, amongst others, the Fiat 1100D.

Contains all necessary parts to freshen-up 1 DCOF carburettor.

Consists, amongst others, of:

  • Needle valve, size 150
  • Pump diaphragm
  • Fuel filters
  • all necessary gaskets
  • Viton (rubber) o-ring
  • Fiber ring
  • Aluminum ring

This is a Carburetor City carburetor service kit.

Rebuild Kit for Weber DCOF carburetors for Fiat 1100

DCOFSERVICEKIT
Rebuild Kit for Weber DCOF carburetors for Fiat 124

Rebuild Kit for Weber DCOF carburetors for Fiat 124

Newly arrived Rebuild Kit for Weber DCOF carburetors for Fiat 124

Comprehensive service kit for Weber DCOF carburetors as used on, amongst others, the:

  • Fiat 124

Contains all necessary parts to freshen-up 1 DCOF carburettor.

Consists, amongst others, of:

  • Needle valve, size 150
  • Pump diaphragm
  • Fuel filters
  • all necessary gaskets
  • Viton (rubber) o-ring
  • Fiber ring
  • Aluminum ring

This is a Carburetor City carburetor service kit.

Rebuild Kit for Weber DCOF carburetors for Fiat 124

DCOM
Service Kit for Weber DCOM carburetors

Service Kit for Weber DCOM carburetors

Comprehensive service kit for Weber DCOM carburetors.

Contains all necessary parts to freshen-up 2 DCOM carburettors.

Consists, amongst others, of:

  • 2 needle valves, size 150
  • 2 pump diaphragms
  • 2 fuel filters
  • all necessary gaskets
  • all necessary Viton (rubber) o-rings
  • all necessary fiber rings
  • all necessary aluminum rings

We can also supply this as a kit for 1 carburetor. The photo shows the full kit for 2 carbs though.

Service Kit for Weber DCOM carburetors

93014.90500
Service Kit for Weber DGV DGAV and DGEV carburetors

Service Kit for Weber DGV DGAV and DGEV carburetors for Ford and Volkswagen

Service Kit for the Weber 32/36 DGV DGAV and DGEV carburetors as fitted to early Ford engines and as a performance modification on Fords and VW Beetles.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

This service kit includes:

  • Pump Diaphragm
  • Anti-Stall Diaphragm
  • Needle valve in size 200
  • Pump jet 1 way valve
  • Fuel inlet filter
  • O rings and gaskets
  • 2 types of mixture screws
  • Carburettor assembly diagram and float height setting information

Required quantity per carburettor: 1

Service Kit for Weber DGV DGAV and DGEV carburetors

FR0426
Service Kit for Weber 32 DIR 41 carburetors for Alfa Romeo Alfasud 1200 TI

Service Kit for Weber 32 DIR 41 carburetors for Alfa Romeo Alfasud 1200 TI

Service kit for the Weber 32DIR41 series carburetors as, amongst others, used on the following cars:

  • Alfa Romeo Alfasud 1200 TI

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as there are many different versions of the Weber DIR carburetor. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please see the pictures for an example of the markings on a Weber 32 DIR carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve (size 175)
  • Fuel Filter
  • Float chamber gasket
  • Base gasket
  • All other required gaskets
  • All required rubber (Viton) o-rings
  • All required copper washers
  • All required aluminum washers

This is a Carburetor City carburetor service kit.

Service Kit for Weber 32 DIR 41 carburetors for Alfa Romeo Alfasud 1200 TI

FR3736
Service Kit for Weber 32 DIR 51/250, 61/100, 61/250, 71/250 en 32 DATRA 7/100 carburetors for Alfasud TI and Alfa 33

Service Kit for Weber 32 DIR 51/250, 61/100, 61/250, 71/250 en 32 DATRA 7/100 carburetors for Alfasud TI and Alfa 33

Service Kit for Weber 32 DIR 51/250, 61/100, 61/250, 71/250 en 32 DATRA 7/100 carburetors for Alfasud TI and Alfa 33.

Service kit for the Weber 32 DIR and 32 DATRA series carburetors as used on, amongst others, the following cars:

  • Alfa Romeo Alfasud TI & QV - 1200
  • Alfa Romeo Alfasud TI & QV - 1300
  • Alfa Romeo Alfasud TI & QV - 1500
  • Alfa Romeo Alfasud Sprint - 1300
  • Alfa Romeo Alfa 33 - 1.3
  • Alfa Romeo Alfa 33 - 1.5

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as there are many different versions of the Weber DIR carburetor. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please see the pictures for an example of the markings on a Weber 32 DIR carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve (size 175)
  • Fuel Filter
  • Choke Diaphragm
  • Float chamber gasket
  • Base gasket
  • All other required gaskets
  • All required rubber (Viton) o-rings
  • All required copper washers
  • All required aluminum washers

This is a Carburetor City carburetor service kit.

Service Kit for Weber 32 DIR 51/250, 61/100, 61/250, 71/250 en 32 DATRA 7/100 carburetors for Alfasud TI and Alfa 33

FR8729
Service Kit for Weber 32 DIR 71 - 81 - 91 - 150 - 151 - 250 carburetors for Alfa Romeo Alfasud and Alfa 33

Service Kit for Weber 32 DIR 71 - 81 - 91 - 150 - 151 - 250 carburetors for Alfa Romeo Alfasud and Alfa 33

Service kit for the Weber 32 DIR series carburetors as, amongst others, used on the following cars:

  • Alfa Romeo Alfasud TI - 1351 cc
  • Alfa Romeo Alfasud Sprint - 1351 + 1490 cc
  • Alfa Romeo Alfasud Super - 1286 + 1490 cc
  • Alfa Romeo Alfa 33 - 79 HP + 1350 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as there are many different versions of the Weber DIR carburetor. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please see the pictures for an example of the markings on a Weber 32 DIR carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve (size 175)
  • Fuel Filter
  • Choke Diaphragm
  • Float chamber gasket
  • Base gasket
  • All other required gaskets
  • All required rubber (Viton) o-rings
  • All required copper washers
  • All required aluminum washers

This is a Carburetor City carburetor service kit.

Service Kit for Weber 32 DIR 71 - 81 - 91 - 150 - 151 - 250 carburetors for Alfa Romeo Alfasud and Alfa 33

FR2232
Rebuild Kit for Weber 32 DIR carburetors for Renault 5 TS

Rebuild Kit for Weber 32 DIR carburetors for Renault 5 TS

Service Set for the Weber 32 DIR carburetors for Renault 5 TS.

Service kit for the Weber 32DIR series carburetors as, amongst others, used on the following cars:

  • Renault 5 TS - 1289 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as there are many different versions of the Weber DIR carburetor. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve (size 175)
  • Fuel Filter
  • Float chamber gasket
  • Base gasket
  • All other required gaskets
  • All required rubber (Viton) o-rings
  • All required copper washers
  • All required aluminum washers

This is a Carburetor City carburetor service kit.

Rebuild Kit for Weber 32 DIR carburetors for Renault 5 TS

FR0720
Rebuild Kit for Weber 32 DIR 75/100 carburetors for Renault 5 Alpine Turbo

Rebuild Kit for Weber 32 DIR 75/100 carburetors for Renault 5 Alpine Turbo

Service Set for Weber 32 DIR 75/100 carburetors for Renault 5 Alpine Turbo.

Service kit for the Weber 32DIR series carburetors as used on the Renault 5 Alpine Turbo.

This 75/100 version of the Weber DIR was especially modified for Turbo-use on the Renault 5 and consequently, this kit contains a number of extra parts to properly services these carburetors.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as there are many different versions of the Weber DIR carburetor. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve (size 175)
  • Fuel Filter
  • Float chamber gasket
  • Base gasket
  • Isolator Block + gaskets
  • Choke Diaphragm
  • Throttle Shaft Seals
  • All other required gaskets
  • All required rubber (Viton) o-rings
  • All required copper washers
  • All required aluminum washers

This is a Carburetor City carburetor service kit.

Rebuild Kit for Weber 32 DIR 75/100 carburetors for Renault 5 Alpine Turbo

FR9643
Rebuild Kit for Weber 32 DIR carburetors for Renault 12 TS and 12 TR

Rebuild Kit for Weber 32 DIR carburetors for Renault 12 TS and 12 TR

Service Set for Weber 32 DIR carburetors for Renault 12 TS and 12 TR.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Please compare your old parts carefully with the ones in the picture as there are many different versions of the Weber DIR carburetor. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve (size 175)
  • Fuel Filter
  • Float chamber gasket
  • Base gasket
  • All other required gaskets
  • All required rubber (Viton) o-rings
  • All required aluminum washers

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Weber 32 DIR carburetors for Renault 12 TS and 12 TR

FR8721
Service Kit for Weber 32 DIR 24/29 carburetors for Renault 15 TL, 15 TS and 16 TS

Rebuild Kit for Weber 32 DIR 24/29 carburetors for Renault 15 TL, 15 TS and 16 TS

Service Kit for Weber 32DIR 24/29 carburetors for Renault 15 TL, 15 TS and 16 TS.

Service kit for the Weber 32DIR series carburetors as, amongst others, used on the following cars:

  • Renault 15TL
  • Renault 15TS
  • Renault 16TS

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as there are many different versions of the Weber DIR carburetor. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please see the pictures for an example of the markings on a Weber 32 DIR carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve (size 175)
  • Fuel Filter
  • Float chamber gasket
  • Base gasket
  • All other required gaskets
  • All required rubber (Viton) o-rings
  • All required copper washers
  • All required aluminum washers

This is a Carburetor City carburetor service kit.

Service Kit for Weber 32 DIR 24/29 carburetors for Renault 15 TL, 15 TS and 16 TS

DIR32
Rebuild Kit for Weber 32 DIR 109/102 en 105/100 carburetors for Volvo 340

Rebuild Kit for Weber 32 DIR 109/102 en 105/100 carburetors for Volvo 340

Service kit for the Weber 32DIR series carburetors as used on the:

  • Volvo 340 L - DL - GL with 1397 cc engine

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Please compare your old parts carefully with the ones in the picture as there are many different versions of the Weber DIR carburetor.

In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve (size 175)
  • Fuel Filter
  • Power Valve Diaphragm
  • Choke Diaphragm
  • Float chamber gasket
  • Base gasket
  • All other required gaskets
  • All required rubber (Viton) o-rings
  • All required copper washers
  • All required aluminum washers

This is a Carburetor City carburetor service kit.

Rebuild Kit for Weber 32 DIR 109/102 en 105/100 carburetors for Volvo 340

DIR32
Rebuild Kit for Weber 32 DIR 109/102 en 105/100 carburetors for Volvo 360

Rebuild Kit for Weber 32 DIR 109/102 en 105/100 carburetors for Volvo 360

Service kit for the Weber 32DIR series carburetors as used on the:

  • Volvo 360 1400

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Please compare your old parts carefully with the ones in the picture as there are many different versions of the Weber DIR carburetor.

In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve (size 175)
  • Fuel Filter
  • Power Valve Diaphragm
  • Choke Diaphragm
  • Float chamber gasket
  • Base gasket
  • All other required gaskets
  • All required rubber (Viton) o-rings
  • All required copper washers
  • All required aluminum washers

This is a Carburetor City carburetor service kit.

Rebuild Kit for Weber 32 DIR 109/102 en 105/100 carburetors for Volvo 360

DMTR
Service Kit for Weber DMTR 32 and 34 carburettors

Service Kit for Weber DMTR 32 and 34 carburetors

Service kit for the Weber DMTR32 and DMTR34 series carburetors.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump diaphragm
  • Complete needle valve (size 175)
  • Fuel Filter
  • Float chamber gasket
  • Base gasket
  • All required Viton o-rings
  • All required fiber rings
  • All required copper and aluminum rings

Service Kit for Weber DMTR 32 and 34 carburettors

PMW301
Weber 32 DRT Carburetor Rebuild Kit for Renault 19

Rebuild Kit Weber 32 DRT Carburetors for Renault 19

Service kit for the Weber DRT 32 series carburetors as used by Renault on the 1988 - 1989 Renault 19 TR en GTR 1400.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Needle Valve Size 175
  • Pump diaphragm
  • Power Valve Diaphragm
  • Various gaskets
  • Various rubber (Viton) o-rings
  • Various copper washers
  • Various aluminum washers

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburetor rebuild kit.

Weber 32 DRT Carburetor Rebuild Kit for Renault 19

PMW301
Weber 32 DRT Carburetor Rebuild Kit for Renault 21

Rebuild Kit for Weber 32 DRT Carburetors for Renault 21

Service kit for the Weber DRT 32 series carburetors as used by Renault on the 1988 - 1989 Renault 21 1400.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Needle Valve Size 175
  • Pump diaphragm
  • Power Valve Diaphragm
  • Various gaskets
  • Various rubber (Viton) o-rings
  • Various copper washers
  • Various aluminum washers

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburetor rebuild kit.

Weber 32 DRT Carburetor Rebuild Kit for Renault 21

DRT/C
Service kit for Weber DRT and DRTC carburetors

Service kit for Weber DRT and DRTC carburetors

Comprehensive service kit for the Weber DRT and DRTC carburetors.

Contains all required parts to service 1 carburetor.

Consists, amongst others, of the following parts:

  • Pump diaphragm
  • Anti-stall diaphragm
  • 175 size Needle valve
  • Fuel inlet filter
  • Throttle shaft seals
  • Throttle shaft tabs
  • Float pivot pin
  • Screws
  • All required o-rings
  • All required aluminum rings

This is a Carburetor City carburetor rebuild kit.

Service kit for Weber DRT and DRTC carburettors

DRT/M
Service kit for Weber DRT and DRTM 32 carburetors

Service kit for Weber DRT and DRTM 32 carburetors

Very comprehensive service kit for the Weber DRT and DRT/M 32 carburetors.

Contains all required parts to service 1 carburetor.

Consists, amongst others, of the following parts:

  • Pump diaphragm
  • Anti-stall diaphragm
  • 200 size Needle valve
  • Fuel inlet filters
  • Throttle shaft seals
  • Throttle shaft tabs
  • Float pivot pin
  • All required o-rings
  • All required aluminum rings

This is a Carburetor City carburetor rebuild kit.

Service kit for Weber DRT and DRTM 32 carburetors

48IDA
Service kit for 1 Weber IDA 2C 48 carburetor

Service kit for 1 Weber IDA 2C 48 carburetor

Comprehensive service kit for the Weber IDA 48 Dual-Barrel carburetors.

Contains all required parts to service 1 carburetor.

Consists, amongst others, of the following parts:

  • 200 size Needle valve
  • Float chamber cover gasket
  • Carb-to-manifold gaskets
  • Various washers
  • Leather throttle shaft seals
  • Parts diagram and float level setting instructions

Service kit for 1 Weber IDA 2C 48 carburetor

IDA3CSK
Service kit for Weber IDA 3C 40 and 3C 46 carburetors

Service kit for 2 Weber 3-Barrel carburetors - IDA - IDAP - IDL - IDPT - IDS - IDT - IF

Comprehensive service kit for the Weber IDA 40 and 46 3C carburetors.

Also fits (the 3-barrel versions of):

  • Weber 40 IDAP
  • Weber 40 IDL
  • Weber 40 IDPT
  • Weber 40 IDS
  • Weber 40 IDT
  • Weber 40 IF

The Weber 3-barrel carburetors were used on an array of cars by Porsche, Ferrari, Lamborghini and many more.

Contains all required parts to service 2 carburetors.

Consists, amongst others, of the following parts:

  • 4 175 size Needle valves
  • 4 Fuel Filters
  • 2 Float chamber cover gasket
  • 2 Pump diaphragms
  • Various washers
  • Parts diagram and float level setting instructions

Service kit for Weber IDA 3C 40 and 3C 46 carburetors

IDF36
Service kit for Weber IDF 36 carburetors

Service kit for Weber IDF 36 carburetors

Comprehensive service kit for the Weber IDF carburetors in 36 mm version.

Contains all required parts to service 1 carburetor.

Consists, amongst others, of the following parts:

  • airfilter gasket
  • float chamber gasket
  • manifold gaskets
  • various o-rings en seals
  • fuel filter
  • pump diaphragms
  • needle valve size 175
  • Parts diagram and float level setting instructions

Service kit for Weber IDF 36 carburetors

IDF40/44
Service kit for Weber IDF 40 and 44 carburetors

Service kit for Weber IDF 40 and 44 carburetors

Comprehensive service kit for the Weber IDF carburetors in 40 and in 44 mm version.

Contains all required parts to service 1 carburetor.

Consists, amongst others, of the following parts:

  • airfilter gasket
  • 2 float chamber gaskets 1 for the IDF40 and 1 for the IDF44; you will use only 1
  • manifold gaskets
  • various o-rings en seals
  • fuel filter
  • 2 pump diaphragms of which you will use only 1
  • 1 needle valve size 175
  • Parts diagram and float level setting instructions

Service kit for Weber IDF 40 and 44 carburetors

IMB
Rebuild Kit for Weber IMB Carburetors

Rebuild Kit for Weber IMB Carburetors

Service parts kit for the Weber IMB28 series carburetors as used, amongst others, on the Fiat 500L and Fiat 126.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Contains all required parts to service 1 carburettor.

Consists of the following parts:

  • 125 size Needle valve
  • Top cover gasket
  • Various other gaskets
  • Fuel inlet filter
  • Rubber (Viton) O rings
  • Aluminum washer for needle valve

Rebuild Kit for Weber IMB Carburetors

TLF Service Kit
Service kit for Weber 32 TLF carburetors

Service kit for Weber 32 TLF carburetors

Service kit for the Weber 32TLF series carburetors.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • 150 size Needle valve
  • Top cover gasket
  • Pump Diaphragm
  • Fuel inlet filter
  • Power Diaphragm
  • O rings and washers
  • Base insulator plate

Service kit for Weber 32 TLF carburetors