Mikuni BDS Carburetor Rebuild Kits
Mikuni BDS Carburetor Rebuild Kits

Mikuni BDS Rebuild Kits

Mikuni BDS carburetor rebuild kits by Carburetor City.

On this page you will find all currently available service sets for the Mikuni BDS range carburetors.

We are still very much expanding our parts offerings for these carburettors so please contact us by email if the part that you are looking for is not yet listed.

Mikuni BDS Carburetor Rebuild Kits by Carburetor City

!
KSK941YK
Rebuild kit for Mikuni BDS Carburetors on Yamaha XVZ 1200 Venture

Rebuild kit for Mikuni BDS Carburetors on Yamaha XVZ 1200 Venture

Service Set for the Mikuni BDS carburetors as used on, amongst others, the:

  • Yamaha XVZ1200 Venture motorcycles

This rebuild kit contains, amongst others, the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Jet Block Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Various Viton (rubber) o-rings as depicted in the photograph
  • Various screws as depicted in the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha XVZ 1200, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life.

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor and the photo shows the exact contents of this service set.

This is a Carburetor City service kit of superb Japanese manufacture.

Rebuild kit for Mikuni BDS Carburetors on Yamaha XVZ 1200 Venture

KSK941YK
Rebuild kit for Mikuni BDS Carburetors on Yamaha XVZ 1300 Venture

Rebuild kit for Mikuni BDS Carburetors on Yamaha XVZ 1300 Venture

Service Kit for the Mikuni BDS carburetors as used on the Yamaha XVZ1300 motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Jet Block Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Various Viton (rubber) o-rings as depicted in the photograph
  • Various screws as depicted in the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha XVZ 1300, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City service kit of superb Japanese manufacture.

Rebuild kit for Mikuni BDS Carburetors on Yamaha XVZ 1300 Venture

KSK941YK
Rebuild kit for Mikuni BDS Carburetors on Yamaha VMX 1200 V-Max

Rebuild kit for Mikuni BDS Carburetors on Yamaha VMX 1200 V-Max

Service Kit for the Mikuni BDS carburetors as used on the Yamaha VMX1200 V-Max motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Jet Block Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Various Viton (rubber) o-rings as depicted in the photograph
  • Various screws as depicted in the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha VMX 1200 , they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City service kit of superb Japanese manufacture.

Rebuild kit for Mikuni BDS Carburetors on Yamaha VMX 1200 V-Max

KSKY0542F

Comprehensive Service Kit for Mikuni BDS Carburetor on Yamaha XV 535 Virago - FRONT

Newly arrived Comprehensive Service Kit for Mikuni BDS Carburetor on Yamaha XV 535 Virago - FRONT

This is our comprehensive rebuild kit for the Mikuni BDS carburetors as used on the Yamaha XV535 Virago motorcycles.

These sets include the jets as since the jet sizing is different for Front and Rear carb on the 535, there are two different sets.

This particular set is for the FRONT carburetor.

The set for the rear carburetor can be found HERE.

Alternatively, there is also a less elaborate service kit available which can be found HERE.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Jet Block Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Jet needle 5DZ10 - Replaces Mikuni numbers 2GV-1490J-00 and 3BM-1490J-00
  • Needle jet - Replaces Mikuni number 2JU-14141-08
  • Jet size 170 - replaces Mikuni number 3G2-14231-34
  • Jet size 135 - replaces Mikuni number 3G2-14231-27
  • Jet size 70 - replaces Mikuni number 3G2-14231-14
  • Idle jet size 35 - replaces Mikuni number 4G0-14142-35-A0
  • Pipe - replaces Mikuni number 2JU-1414G-00
  • Various Viton (rubber) o-rings as per the photograph
  • Various screws as per the photograph
  • Various springs and small material as per the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha XV 535, they are sometimes transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit, Made in Japan to extremely exacting standards.

Comprehensive Service Kit for Mikuni BDS Carburetor on Yamaha XV 535 Virago - FRONT

KSKY0542R
Comprehensive Service Kit for Mikuni BDS Carburetor on Yamaha XV 535 Virago - REAR

Comprehensive Service Kit for Mikuni BDS Carburetor on Yamaha XV 535 Virago - REAR

Newly arrived Comprehensive Service Kit for Mikuni BDS Carburetor on Yamaha XV 535 Virago - REAR

This is our comprehensive rebuild kit for the Mikuni BDS carburetors as used on the Yamaha XV535 Virago motorcycles.

These sets include the jets as since the jet sizing is different for Front and Rear carb on the 535, there are two different sets.

This particular set is for the REAR carburetor.

The set for the front carburetor can be found HERE.

Alternatively, there is also a less elaborate service kit available which can be found HERE.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Jet Block Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Jet needle 5DZ9 - Replaces Mikuni numbers 2GV-1490J-10 and 3BM-1490J-10
  • Needle jet - Replaces Mikuni number 2JU-14141-08
  • Jet size 170 - replaces Mikuni number 3G2-14231-34
  • Jet size 137.5 - replaces Mikuni number 3G2-1423A-78
  • Jet size 70 - replaces Mikuni number 3G2-14231-14
  • Idle jet size 35 - replaces Mikuni number 4G0-14142-35-A0
  • Pipe - replaces Mikuni number 2JU-1414G-00
  • Various Viton (rubber) o-rings as per the photograph
  • Various screws as per the photograph
  • Various springs and small material as per the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha XV 535, they are sometimes transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit, Made in Japan to extremely exacting standards.

Comprehensive Service Kit for Mikuni BDS Carburetor on Yamaha XV 535 Virago - REAR

KSK941YK
Rebuild kit for Mikuni BDS Carburetors on Yamaha XV 535 Virago

Rebuild kit for Mikuni BDS Carburetors on Yamaha XV 535 Virago

This is our standard service Kit for the Mikuni BDS carburetors as used on the Yamaha XV535 Virago motorcycles.

If you desire a more elaborate kit, you can find the comprehensive kit for the FRONT carburetor HERE and the one for the REAR carburetor HERE.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Jet Block Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Various Viton (rubber) o-rings as depicted in the photograph
  • Various screws as depicted in the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha XV 535 , they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit, Made in Japan to extremely exacting standards

Rebuild kit for Mikuni BDS Carburetors on Yamaha XV 535 Virago

KSKVN-16Q2T
Needle Valve for Mikuni BDS carburetors for Yamaha XV535 Virago

Needle Valve for Mikuni BDS carburetors for Yamaha XV535 Virago

Needle valve for the Mikuni BDS series carburetors as used on, amongst others, the Yamaha XV 535 Virago.

Viton-tipped for superior sealing qualities.

Replaces Mikuni part number: 3GM-14107-17-00

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the needle shown will fit your bike.

This is a Carburetor City Needle Valve, Made in Japan to extremely exacting standards.

Needle Valve for Mikuni BDS carburetors for Yamaha XV535 Virago