Yamaha Carburetor Rebuild Kits
Yamaha Carburetor Rebuild Kits

Yamaha

Yamaha Carburetor Rebuild Kits and Service Sets by Carburetor City.

On this page you will find the carburetor rebuild kits that we can supply for the various Yamaha motorcycle models.

If your model isn't listed yet, please don't hesitate to contact us by email as there is a very good chance that we can help you anyway.

Our Contact Page can be found HERE.

!

Yamaha Carburetor Rebuild Kits and Service Sets by Carburetor City

!
KSKY0561
Rebuild Kit for Mikuni Carburetors for Yamaha FJ1200 3CW en 3YA

Rebuild Kit for Mikuni Carburetors for Yamaha FJ1200 3CW en 3YA

Service Kit for the Mikuni carburetors as used on the 1988 - 1995 Yamaha FJ1200 3CW en 3YA motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Needle 5FZ74
  • Needle Clip
  • Needle Jet Y-2
  • Main jet, size 110
  • Idle jet 42.5
  • Drain Plug
  • Various Viton (rubber) o-rings as depicted in the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha FJ1200, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

Base settings:

  • Needle: 3rd notch
  • Float Level: 21.3 - 23.3 mm
  • Mixture screw: fully in until gently seated, then 3 full turns out

This is a Carburetor City service kit of superb Japanese manufacture.

Rebuild Kit for Mikuni Carburetors for Yamaha FJ1200 3CW en 3YA

KSK688
Rebuild Kit for Mikuni BDST carburetors for Yamaha FZR1000 Exup

Rebuild Kit for Mikuni BDST carburetors for Yamaha FZR1000 Exup

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Yamaha FZR1000 Exup.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City service kit of superb Japanese manufacture.

Rebuild Kit for Mikuni BDST carburetors for Yamaha FZR1000 Exup

KSKVN-16Q2T
Needle Valve for Mikuni BDST carburetors for Yamaha FZR1000 Exup

Needle Valve for Mikuni BDST carburetors for Yamaha FZR1000 Exup

Needle valve for the Mikuni BDST series carburetors as used on, amongst others, the Yamaha FZR1000 Exup.

Viton-tipped for superior sealing qualities.

Replaces Mikuni part number: 3GM-14107-17-00

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the needle shown will fit your bike.

This is a Carburetor City Needle Valve, Made in Japan to extremely exacting Standards.

Needle Valve for Mikuni BDST carburetors for Yamaha FZR1000 Exup

KSK688
Rebuild Kit for Mikuni BDST carburetors for Yamaha TDM 850

Rebuild Kit for Mikuni BDST carburetors for Yamaha TDM 850

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Yamaha TDM 850.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City service kit of superb Japanese manufacture.

Rebuild Kit for Mikuni BDST carburetors for Yamaha TDM 850

KSKVN-16Q2T
Needle Valve for Mikuni BDST carburetors for Yamaha TDM850

Needle Valve for Mikuni BDST carburetors for Yamaha TDM850

Needle valve for the Mikuni BDST series carburetors as used on, amongst others, the Yamaha TDM 850.

Viton-tipped for superior sealing qualities.

Replaces Mikuni part number: 3GM-14107-17-00

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the needle shown will fit your bike.

This is a Carburetor City Needle Valve, Made in Japan to extremely exacting Standards.

Needle Valve for Mikuni BDST carburetors for Yamaha TDM850

KSK688
Rebuild Kit for Mikuni BDST carburetors for Yamaha TRX 850

Rebuild Kit for Mikuni BDST carburetors for Yamaha TRX 850

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Yamaha TRX 850.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City service kit of superb Japanese manufacture.

Rebuild Kit for Mikuni BDST carburetors for Yamaha TRX 850

KSK941YK
Rebuild kit for Mikuni BDS Carburetors on Yamaha VMX 1200 V-Max

Rebuild kit for Mikuni BDS Carburetors on Yamaha VMX 1200 V-Max

Service Kit for the Mikuni BDS carburetors as used on the Yamaha VMX1200 V-Max motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Jet Block Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Various Viton (rubber) o-rings as depicted in the photograph
  • Various screws as depicted in the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha VMX 1200 , they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City service kit of superb Japanese manufacture.

Rebuild kit for Mikuni BDS Carburetors on Yamaha VMX 1200 V-Max

KSKVN-16Q2T
Needle Valve for Mikuni BDST carburetors for Yamaha TRX850

Needle Valve for Mikuni BDST carburetors for Yamaha TRX850

Needle valve for the Mikuni BDST series carburetors as used on, amongst others, the Yamaha TRX 850.

Viton-tipped for superior sealing qualities.

Replaces Mikuni part number: 3GM-14107-17-00

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the needle shown will fit your bike.

This is a Carburetor City Needle Valve, Made in Japan to extremely exacting Standards.

Needle Valve for Mikuni BDST carburetors for Yamaha TRX850

KSKY0218
Rebuild Kit for Mikuni carburetors for Yamaha XT 250

Rebuild Kit for Mikuni carburetors for Yamaha XT 250

Newly arrived Rebuild Kit for Mikuni carburetors for Yamaha XT 250

Service Kit for Mikuni carburetor as used on the 1979 - 1990 Yamaha XT250 3Y3.

Contains the following parts to service 1 carburettor:

  • Float Chamber Gasket
  • Top Cover Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Needle Y217 - replaces Mikuni number 168-14116-67
  • Main Jet Size 165 - replaces Mikuni number 137-14143-33
  • Idle Jet Size 17.5 - replaces Mikuni number 3Y1-14142-17
  • Pump diaphragm
  • Various small items such as O-rings, washers, clip etc as per the photograph

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City service kit of superb Japanese manufacture.

Rebuild Kit for Mikuni carburetors for Yamaha XT 250

KSK688
Rebuild Kit for Mikuni BDST carburetors for Yamaha XTZ 750

Rebuild Kit for Mikuni BDST carburetors for Yamaha XTZ 750

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Yamaha XTZ 750.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City service kit of superb Japanese manufacture.

Rebuild Kit for Mikuni BDST carburetors for Yamaha XTZ 750

KSKVN-16Q2T
Needle Valve for Mikuni BDST carburetors for Yamaha XTZ750

Needle Valve for Mikuni BDST carburetors for Yamaha XTZ750

Needle valve for the Mikuni BDST series carburetors as used on, amongst others, the Yamaha XTZ 750.

Viton-tipped for superior sealing qualities.

Replaces Mikuni part number: 3GM-14107-17-00

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the needle shown will fit your bike.

This is a Carburetor City Needle Valve, Made in Japan to extremely exacting Standards.

Needle Valve for Mikuni BDST carburetors for Yamaha XTZ750

KSKY0542F

Comprehensive Service Kit for Mikuni BDS Carburetor on Yamaha XV 535 Virago - FRONT

Newly arrived Comprehensive Service Kit for Mikuni BDS Carburetor on Yamaha XV 535 Virago - FRONT

This is our comprehensive rebuild kit for the Mikuni BDS carburetors as used on the Yamaha XV535 Virago motorcycles.

These sets include the jets as since the jet sizing is different for Front and Rear carb on the 535, there are two different sets.

This particular set is for the FRONT carburetor.

The set for the rear carburetor can be found HERE.

Alternatively, there is also a less elaborate service kit available which can be found HERE.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Jet Block Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Jet needle 5DZ10 - Replaces Mikuni numbers 2GV-1490J-00 and 3BM-1490J-00
  • Needle jet - Replaces Mikuni number 2JU-14141-08
  • Jet size 170 - replaces Mikuni number 3G2-14231-34
  • Jet size 135 - replaces Mikuni number 3G2-14231-27
  • Jet size 70 - replaces Mikuni number 3G2-14231-14
  • Idle jet size 35 - replaces Mikuni number 4G0-14142-35-A0
  • Pipe - replaces Mikuni number 2JU-1414G-00
  • Various Viton (rubber) o-rings as per the photograph
  • Various screws as per the photograph
  • Various springs and small material as per the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha XV 535, they are sometimes transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit, Made in Japan to extremely exacting standards.

Comprehensive Service Kit for Mikuni BDS Carburetor on Yamaha XV 535 Virago - FRONT

KSKY0542R
Comprehensive Service Kit for Mikuni BDS Carburetor on Yamaha XV 535 Virago - REAR

Comprehensive Service Kit for Mikuni BDS Carburetor on Yamaha XV 535 Virago - REAR

Newly arrived Comprehensive Service Kit for Mikuni BDS Carburetor on Yamaha XV 535 Virago - REAR

This is our comprehensive rebuild kit for the Mikuni BDS carburetors as used on the Yamaha XV535 Virago motorcycles.

These sets include the jets as since the jet sizing is different for Front and Rear carb on the 535, there are two different sets.

This particular set is for the REAR carburetor.

The set for the front carburetor can be found HERE.

Alternatively, there is also a less elaborate service kit available which can be found HERE.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Jet Block Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Jet needle 5DZ9 - Replaces Mikuni numbers 2GV-1490J-10 and 3BM-1490J-10
  • Needle jet - Replaces Mikuni number 2JU-14141-08
  • Jet size 170 - replaces Mikuni number 3G2-14231-34
  • Jet size 137.5 - replaces Mikuni number 3G2-1423A-78
  • Jet size 70 - replaces Mikuni number 3G2-14231-14
  • Idle jet size 35 - replaces Mikuni number 4G0-14142-35-A0
  • Pipe - replaces Mikuni number 2JU-1414G-00
  • Various Viton (rubber) o-rings as per the photograph
  • Various screws as per the photograph
  • Various springs and small material as per the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha XV 535, they are sometimes transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit, Made in Japan to extremely exacting standards.

Comprehensive Service Kit for Mikuni BDS Carburetor on Yamaha XV 535 Virago - REAR

KSK941YK
Rebuild kit for Mikuni BDS Carburetors on Yamaha XV 535 Virago

Rebuild kit for Mikuni BDS Carburetors on Yamaha XV 535 Virago

This is our standard service Kit for the Mikuni BDS carburetors as used on the Yamaha XV535 Virago motorcycles.

If you desire a more elaborate kit, you can find the comprehensive kit for the FRONT carburetor HERE and the one for the REAR carburetor HERE.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Jet Block Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Various Viton (rubber) o-rings as depicted in the photograph
  • Various screws as depicted in the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha XV 535 , they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit, Made in Japan to extremely exacting standards

Rebuild kit for Mikuni BDS Carburetors on Yamaha XV 535 Virago

KSKVN-16Q2T
Needle Valve for Mikuni BDS carburetors for Yamaha XV535 Virago

Needle Valve for Mikuni BDS carburetors for Yamaha XV535 Virago

Needle valve for the Mikuni BDS series carburetors as used on, amongst others, the Yamaha XV 535 Virago.

Viton-tipped for superior sealing qualities.

Replaces Mikuni part number: 3GM-14107-17-00

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these diaphragms might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the needle shown will fit your bike.

This is a Carburetor City Needle Valve, Made in Japan to extremely exacting standards.

Needle Valve for Mikuni BDS carburetors for Yamaha XV535 Virago

KSK941YK
Rebuild kit for Mikuni BDS Carburetors on Yamaha XVZ 1200 Venture

Rebuild kit for Mikuni BDS Carburetors on Yamaha XVZ 1200 Venture

Service Set for the Mikuni BDS carburetors as used on, amongst others, the:

  • Yamaha XVZ1200 Venture motorcycles

This rebuild kit contains, amongst others, the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Jet Block Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Various Viton (rubber) o-rings as depicted in the photograph
  • Various screws as depicted in the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha XVZ 1200, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life.

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor and the photo shows the exact contents of this service set.

This is a Carburetor City service kit of superb Japanese manufacture.

Rebuild kit for Mikuni BDS Carburetors on Yamaha XVZ 1200 Venture

KSK941YK
Rebuild kit for Mikuni BDS Carburetors on Yamaha XVZ 1300 Venture

Rebuild kit for Mikuni BDS Carburetors on Yamaha XVZ 1300 Venture

Service Kit for the Mikuni BDS carburetors as used on the Yamaha XVZ1300 motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Jet Block Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Various Viton (rubber) o-rings as depicted in the photograph
  • Various screws as depicted in the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha XVZ 1300, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City service kit of superb Japanese manufacture.

Rebuild kit for Mikuni BDS Carburetors on Yamaha XVZ 1300 Venture

KSK688
Rebuild Kit for Mikuni BDST carburetors for Yamaha YZF750R

Rebuild Kit for Mikuni BDST carburetors for Yamaha YZF750R

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Yamaha YZF 750 R.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City service kit of superb Japanese manufacture.

Rebuild Kit for Mikuni BDST carburetors for Yamaha YZF750R