Mikuni Carburetor Rebuild Kits by Carburetor City
Mikuni Carburetor Rebuild Kits by Carburetor City

Mikuni Carburetor Rebuild Kits

Mikuni Carburetor Rebuild Kits by Carburetor City.

On this page you will find our service sets for Mikuni carburettors.

Please note that some Solex carburetors were also produced under the Mikuni brand and that small differences between the two do exist.

Our Solex range of service kits can be found HERE.

Mikuni Carburetor Rebuild Kits by Carburetor City

!
KSK1484
Rebuild kit for Mikuni Carburetors on Suzuki GSF400 Bandit

Rebuild kit for Mikuni Carburetors on Suzuki GSF400 Bandit

Newly arrived Rebuild kit for Mikuni Carburetors on Suzuki GSF400 Bandit

Service Kit for the Mikuni carburetors as used on the 1991 - 1993 Suzuki GSF400 Bandit.

This service kit contains the following parts to service 4 carburettors:

  • 4 x Float Bowl Gasket
  • 4 x Needle Valve

Although these carburetors were originally delivered on the above mentioned motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor and the photo shows the exact contents of this service set.

This is a Carburetor City carburetor rebuild kit.

Rebuild kit for Mikuni Carburetors on Suzuki GSF400 Bandit

KSK941YK
Rebuild kit for Mikuni BDS Carburetors on Yamaha XVZ 1200 Venture

Rebuild kit for Mikuni BDS Carburetors on Yamaha XVZ 1200 Venture

Service Set for the Mikuni BDS carburetors as used on, amongst others, the:

  • Yamaha XVZ1200 Venture motorcycles

This rebuild kit contains, amongst others, the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Jet Block Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Various Viton (rubber) o-rings as depicted in the photograph
  • Various screws as depicted in the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha XVZ 1200, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life.

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor and the photo shows the exact contents of this service set.

This is a Carburetor City carburetor rebuild kit.

Rebuild kit for Mikuni BDS Carburetors on Yamaha XVZ 1200 Venture

KSK941YK
Rebuild kit for Mikuni BDS Carburetors on Yamaha XVZ 1300 Venture

Rebuild kit for Mikuni BDS Carburetors on Yamaha XVZ 1300 Venture

Service Kit for the Mikuni BDS carburetors as used on the Yamaha XVZ1300 motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Jet Block Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Various Viton (rubber) o-rings as depicted in the photograph
  • Various screws as depicted in the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha XVZ 1300, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild kit for Mikuni BDS Carburetors on Yamaha XVZ 1300 Venture

KSK941YK
Rebuild kit for Mikuni BDS Carburetors on Yamaha VMX 1200 V-Max

Rebuild kit for Mikuni BDS Carburetors on Yamaha VMX 1200 V-Max

Service Kit for the Mikuni BDS carburetors as used on the Yamaha VMX1200 V-Max motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Jet Block Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Various Viton (rubber) o-rings as depicted in the photograph
  • Various screws as depicted in the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha VMX 1200 , they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild kit for Mikuni BDS Carburetors on Yamaha VMX 1200 V-Max

KSK941YK
Rebuild kit for Mikuni BDS Carburetors on Yamaha XV 535 Virago

Rebuild kit for Mikuni BDS Carburetors on Yamaha XV 535 Virago

Service Kit for the Mikuni BDS carburetors as used on the Yamaha XV535 Virago motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Jet Block Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Various Viton (rubber) o-rings as depicted in the photograph
  • Various screws as depicted in the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha XV 535 , they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild kit for Mikuni BDS Carburetors on Yamaha XV 535 Virago

9604502000
Rebuild Kit for Solex Mikuni 28/32 DIDTA carburetors for Mitsubishi Plymouth and Dodge

Rebuild Kit for Solex Mikuni 28/32 DIDTA carburetors for Mitsubishi Plymouth and Dodge

Service kit for the Solex Mikuni 28/32 DIDTA carburetor as used mainly by Mitsubishi on the following models:

  • 1976 - 1981 Mitsubishi Celeste 1600
  • 1979 - 1982 Mitsubishi Colt 1400
  • 1974 - 1978 Mitsubishi Galant 1600
  • 1974 - 1977 Mitsubishi Galant 2000
  • 1976 - 1979 Mitsubishi Lancer 1200
  • 1974 - 1979 Mitsubishi Lancer 1400
  • 1974 - 1978 Mitsubishi Lancer 1600
  • 1977 - 1980 Mitsubishi Sigma 1600
  • 1978 - 1979 Mitsubishi Sapporo GSR 2000 Manual Gearbox

Also fits the following Dodge variants:

  • Dodge Arrow
  • Dodge Challenger
  • Dodge Colt

Also fits the following Plymouth variants:

  • Plymouth Arrow
  • Plymouth Champ
  • Plymouth Sapporo

Contains, amongst others, the following parts:

  • All necessary gaskets
  • All necessary copper rings
  • All necessary aluminum rings
  • All necessary rubber (Viton) rings
  • Pump Diaphragm
  • Needle valve (size 170)

Contains the parts to service 1 carburettor.

It fits the following variations of the Solex Mikuni DIDTA and DIDSA carburetors:

  • Solex Mikuni 28/32DIDTA
  • Solex Mikuni DIDTA
  • Solex Mikuni 30/32DIDSA
  • Solex Mikuni 30/32DIDTA

Rebuild Kit for Solex Mikuni 28/32 DIDTA carburetors for Mitsubishi Plymouth and Dodge

DIDTADODGE
Rebuild Kit for Solex Mikuni DIDTA carburetors for Mitsubishi Mopar Chrysler Dodge Plymouth

Rebuild Kit for Solex Mikuni DIDTA carburetors for Mitsubishi Mopar Chrysler Dodge Plymouth

Service kit for the Solex Mikuni DIDTA carburetor as used mainly on American versions of compact Mitsubishi cars with 1.4, 1.6, 2.0 and 2.2 liter Chrysler engines.

Suitable for at least the following cars:

  • Dodge Arrow
  • Dodge Challenger
  • Dodge Colt
  • Plymouth Arrow
  • Plymouth Champ
  • Plymouth Sapporo

Might also fit the Japanese and European Mitsubishi versions:

  • Mitsubishi Celeste 1600
  • Mitsubishi Colt 1400
  • Mitsubishi Galant 1600
  • Mitsubishi Galant 2000
  • Mitsubishi Lancer 1200
  • Mitsubishi Lancer 1400
  • Mitsubishi Lancer 1600
  • Mitsubishi Sigma 1600
  • Mitsubishi Sapporo GSR 2000 Manual

It fits the following variations of the Solex Mikuni DIDTA carburetors:

  • Solex Mikuni 28-32DIDTA-90
  • Solex Mikuni 28-32DIDTA-91
  • Solex Mikuni 28-32DIDTA-92
  • Solex Mikuni 28-32DIDTA-93
  • Solex Mikuni 28-32DIDTA-146
  • Solex Mikuni 28-32DIDTA-147
  • Solex Mikuni 28-32DIDTA-148
  • Solex Mikuni 28-32DIDTA-190
  • Solex Mikuni 28-32DIDTA-191
  • Solex Mikuni 30-32DIDTA-192
  • Solex Mikuni 28-32DIDTA-193
  • Solex Mikuni 28-32DIDTA-194
  • Solex Mikuni 28-32DIDTA-195
  • Solex Mikuni 28-32DIDTA-196
  • Solex Mikuni 30-32DIDTA-197
  • Solex Mikuni 28-32DIDTA-210
  • Solex Mikuni 28-32DIDTA-211
  • Solex Mikuni 28-32DIDTA-212
  • Solex Mikuni 28-32DIDTA-213
  • Solex Mikuni 28-32DIDTA-214
  • Solex Mikuni 28-32DIDTA-215
  • Solex Mikuni 28-32DIDTA-216
  • Solex Mikuni 28-32DIDTA-270
  • Solex Mikuni 28-32DIDTA-271
  • Solex Mikuni 28-32DIDTA-272
  • Solex Mikuni 28-32DIDTA-273
  • Solex Mikuni 28-32DIDTA-274
  • Solex Mikuni 28-32DIDTA-275
  • Solex Mikuni 28-32DIDTA-276
  • Solex Mikuni 30-32DIDTA-190
  • Solex Mikuni 30-32DIDTA-191
  • Solex Mikuni 30-32DIDTA-192
  • Solex Mikuni 30-32DIDTA-197

Contains, amongst others, the following parts:

  • All necessary gaskets
  • All necessary copper washers
  • All necessary aluminum washers
  • All necessary rubber (Viton) rings
  • Various diaphragms
  • Needle valve

Contains the parts to service 1 carburettor.

Includes an exploded view drawing and rebuild instructions.

Rebuild Kit for Solex Mikuni DIDTA carburetors for Mitsubishi Mopar Chrysler Dodge Plymouth

KSK688
Rebuild Kit for Mikuni BDST carburetors for Cagiva Elefant 750 and 900

Rebuild Kit for Mikuni BDST carburetors for Cagiva Elefant 750 and 900

Service Kit for Mikuni BDST carburetors as used on the Cagiva Elefant 750 & 900.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild Kit for Mikuni BDST carburetors for Cagiva Elefant 750 and 900

KSK688
Rebuild Kit for Mikuni BDST carburetors for Ducati 600 SS

Rebuild Kit for Mikuni BDST carburetors for Ducati 600 SS

Service Kit for Mikuni BDST carburetors as used on, amongst others, the:

  • Ducati 600 SS SuperSport

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild Kit for Mikuni BDST carburetors for Ducati 600 SS

KSK688
Rebuild Kit for Mikuni BDST carburetors for Ducati 600 Monster

Rebuild Kit for Mikuni BDST carburetors for Ducati 600 Monster

Newly arrived Rebuild Kit for Mikuni BDST carburetors for Ducati 600 Monster

Service Kit for Mikuni BDST carburetors as used on , amongst others, the:

  • Ducati 600 Monster

This rebuild kit contains, amongst others, the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life.

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor and the photo shows the exact contents of this service set.

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Mikuni BDST carburetors for Ducati 600 Monster

KSK688
Rebuild Kit for Mikuni BDST carburetors for Ducati 750 SS

Rebuild Kit for Mikuni BDST carburetors for Ducati 750 SS

Service Kit for Mikuni BDST carburetors as used on , amongst others, the Ducati 750 SS SuperSport (1991 - 1998).

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild Kit for Mikuni BDST carburetors for Ducati 750 SS

KSK688
Rebuild Kit for Mikuni BDST carburetors for Ducati 750 Monster

Rebuild Kit for Mikuni BDST carburetors for Ducati 750 Monster

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Ducati 750 Monster (1991 - 1998).

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild Kit for Mikuni BDST carburetors for Ducati 750 Monster

KSK688
Rebuild Kit for Mikuni BDST carburetors for Ducati 900 SS

Rebuild Kit for Mikuni BDST carburetors for Ducati 900 SS

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Ducati 900 SS SuperSport (1991 - 1998).

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild Kit for Mikuni BDST carburetors for Ducati 900 SS

KSK688
Rebuild Kit for Mikuni BDST carburetors for Ducati 900 Monster

Rebuild Kit for Mikuni BDST carburetors for Ducati 900 Monster

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Ducati 900 Monster (1993 - 1998).

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild Kit for Mikuni BDST carburetors for Ducati 900 Monster

KSKY0561
Rebuild Kit for Mikuni Carburetors for Yamaha FJ1200 3CW en 3YA

Rebuild Kit for Mikuni Carburetors for Yamaha FJ1200 3CW en 3YA

Service Kit for the Mikuni carburetors as used on the 1988 - 1995 Yamaha FJ1200 3CW en 3YA motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Needle 5FZ74
  • Needle Clip
  • Needle Jet Y-2
  • Main jet, size 110
  • Idle jet 42.5
  • Drain Plug
  • Various Viton (rubber) o-rings as depicted in the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha FJ1200, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

Base settings:

  • Needle: 3rd notch
  • Float Level: 21.3 - 23.3 mm
  • Mixture screw: fully in until gently seated, then 3 full turns out

This is a Carburetor City carburetor service kit.

Rebuild Kit for Mikuni Carburetors for Yamaha FJ1200 3CW en 3YA

KSK688
Rebuild Kit for Mikuni BDST carburetors for Yamaha FZR1000 Exup

Rebuild Kit for Mikuni BDST carburetors for Yamaha FZR1000 Exup

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Yamaha FZR1000 Exup.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild Kit for Mikuni BDST carburetors for Yamaha FZR1000 Exup

KSK688
Rebuild Kit for Mikuni BDST carburetors for Yamaha TDM 850

Rebuild Kit for Mikuni BDST carburetors for Yamaha TDM 850

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Yamaha TDM 850.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild Kit for Mikuni BDST carburetors for Yamaha TDM 850

KSK688
Rebuild Kit for Mikuni BDST carburetors for Yamaha TRX 850

Rebuild Kit for Mikuni BDST carburetors for Yamaha TRX 850

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Yamaha TRX 850.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild Kit for Mikuni BDST carburetors for Yamaha TRX 850

KSK688
Rebuild Kit for Mikuni BDST carburetors for Yamaha XTZ 750

Rebuild Kit for Mikuni BDST carburetors for Yamaha XTZ 750

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Yamaha XTZ 750.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild Kit for Mikuni BDST carburetors for Yamaha XTZ 750

KSK688
Rebuild Kit for Mikuni BDST carburetors for Yamaha YZF750R

Rebuild Kit for Mikuni BDST carburetors for Yamaha YZF750R

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Yamaha YZF 750 R.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild Kit for Mikuni BDST carburetors for Yamaha YZF750R

KSK1345BK
Rebuild Kit for Mikuni BST 33 carburetors

Rebuild Kit for Mikuni BST 33 carburetors

Service Kit for Mikuni BST 33 carburetors.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Needle Valve Set
  • Main Jet # 140
  • Idle Jet # 41.3
  • Needle # Y430 = 5E94
  • Needle Clip
  • Needle Jet # 584 0-2
  • Mixture Screw Assembly
  • Various Washers and Rubber (Viton) O-Rings (See photo)

This is a Carburetor City carburetor service kit.

Rebuild Kit for Mikuni BST 33 carburetors by Carburetor City

KSK584
Rebuild Kit for Mikuni BST 38 carburetors

Rebuild Kit for Mikuni BST 38 carburetors

Service Kit for Mikuni BST38 carburetors.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Viton-tipped Needle Valve Set
  • Various Rubber (Viton) O-Rings (See photo)

This is a Carburetor City carburetor service kit.

 

Rebuild Kit for Mikuni BST 38 carburetors

KSK584
Rebuild Kit for Mikuni BST 40 carburetors

Rebuild Kit for Mikuni BST 40 carburetors

Service Kit for Mikuni BST40 carburetors.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Viton-tipped Needle Valve Set
  • Various Rubber (Viton) O-Rings (See photo)

This is a Carburetor City carburetor service kit.

 

Rebuild Kit for Mikuni BST 40 carburetors

KSK1345BK
Rebuild Kit for Mikuni BST 33 carburetors for BMW F650

Rebuild Kit for Mikuni BST 33 carburetors for BMW F650

Newly arrived Rebuild Kit for Mikuni BST 33 carburetors for BMW F650

Service Kit for Mikuni BST 33 carburetors as used on, amongst others, the:

  • BMW F650 motorcycles

Although these carburetors were originally delivered on the above mentioned BMW F-650, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This rebuild kit contains, amongst others, the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Needle Valve Set
  • Main Jet # 140
  • Idle Jet # 41.3
  • Needle # Y430 = 5E94
  • Needle Clip
  • Needle Jet # 584 0-2
  • Mixture Screw Assembly
  • Various Washers and Rubber (Viton) O-Rings (See photo)

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor and the photo shows the exact contents of this service set.

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Mikuni BST 33 carburetors for BMW F650

KSK584
Rebuild Kit for Mikuni BST 38 carburetors for Suzuki GSXR750W

Rebuild Kit for Mikuni BST 38 carburetors for Suzuki GSXR750W

Service Kit for Mikuni BST38 carburetors as used on, amongst others, the 1992 - 1995 Suzuki GSXR750W motorcycles.

Although these carburetors were originally delivered on the above mentioned Suzuki, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Viton-tipped Needle Valve Set
  • Various Rubber (Viton) O-Rings (See photo)

This is a Carburetor City carburetor service kit.

Rebuild Kit for Mikuni BST 38 carburetors for Suzuki GSXR750W

KSK584
Rebuild Kit for Mikuni BST 40 carburetors for Suzuki GSXR1100W

Rebuild Kit for Mikuni BST 40 carburetors for Suzuki GSXR1100W

Service Kit for Mikuni BST40 carburetors as used on, amongst others, the:

  • 1993 - 1995 Suzuki GSXR1100W motorcycles

Although these carburetors were originally delivered on the above mentioned Suzuki, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Viton-tipped Needle Valve Set
  • Various Rubber (Viton) O-Rings (See photo)

This is a Carburetor City carburetor service kit.

Rebuild Kit for Mikuni BST 40 carburetors for Suzuki GSXR1100W

PMH13
Rebuild Kit for Solex Mikuni 28-30 PHD carburetors or Suzuki Cervo

Rebuild Kit for Solex Mikuni 28-30 PHD carburetors for Suzuki Cervo

Service kit for the Solex Mikuni 28 30 PHD carburetors as used on, amongst others, the:

  • Suzuki Cervo

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Various gaskets
  • Various aluminum washers
  • Copper washer
  • Rubber o-ring

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please note that the PHD was produced both as Solex PHD and under license by Mikuni.

The Mikuni PHD can be found HERE.
The Solex PHD can be found HERE.

This is a Carburetor City carburetor service kit.

Rebuild Kit for Solex Mikuni 28-30 PHD carburetors for Suzuki Cervo

PMH13
Rebuild Kit for Solex Mikuni 28-30 PHD carburetors for Suzuki LJ80 and LJ81

Rebuild Kit for Solex Mikuni 28-30 PHD carburetors for Suzuki LJ80 and LJ81

Service kit for the Solex Mikuni 28 30 PHD carburetors as used on, amongst others, the:

  • 1980 - 1981 Suzuki LJ80 & LJ81

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Various gaskets
  • Various aluminum washers
  • Copper washer
  • Rubber o-ring

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please note that the PHD was produced both as Solex PHD and under license by Mikuni.

The Mikuni PHD can be found HERE.
The Solex PHD can be found HERE.

This is a Carburetor City carburetor service kit.

Rebuild Kit for Solex Mikuni 28-30 PHD carburetors for Suzuki LJ80 and LJ81

PMH13
Rebuild Kit for Solex Mikuni 32 PHD carburetors for Suzuki SJ20

Rebuild Kit for Solex Mikuni 32 PHD carburetors for Suzuki SJ20

Service kit for the Solex Mikuni 32 PHD carburetors as used on, amongst others, the:

  • 1980 - 1982 Suzuki SJ20 4WD

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Various gaskets
  • Various aluminum washers
  • Copper washer
  • Rubber o-ring

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please note that the PHD was produced both as Solex PHD and under license by Mikuni. The Mikuni PHD can be found HERE. The Solex PHD can be found HERE.

This is a Carburetor City carburetor service kit.

Rebuild Kit for Solex Mikuni 32 PHD carburetors for Suzuki SJ20

PMH13
Rebuild Kit for Solex Mikuni 28-30 PHD carburetors for Suzuki ST80 and ST90

Rebuild Kit for Solex Mikuni 28-30 PHD carburetors for Suzuki ST80 and ST90

Newly arrived Rebuild Kit for Solex Mikuni 28-30 PHD carburetors for Suzuki ST80 and ST90

Service kit for the Solex Mikuni 28 30 PHD carburetors as used on, amongst others, the:

  • Suzuki ST80
  • Suzuki ST90

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

This rebuild kit contains, amongst others, the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragm
  • Various gaskets
  • Various aluminum washers
  • Copper washer
  • Rubber o-ring

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor and the photo shows the exact contents of this service set.

This is a Carburetor City carburetor rebuild kit.

Please note that the PHD was produced both as Solex PHD and under license by Mikuni.

The Mikuni PHD can be found HERE.
The Solex PHD can be found HERE.

Rebuild Kit for Solex Mikuni 28-30 PHD carburetors for Suzuki ST80 and ST90